Music Menu - Jacuzzi J-485 Owner's Manual

J-400
= Intensity Indicator: Displays the current intensity level of the
lights by the number of bars filled in. This will only work with
the solid color option. If the blending mode is on, the light bulb
is grayed out. The range is from 0 to 5.
= Speed Control Button (Increase): Tap to increase the
blending speed, of the colors, to the maximum speed of 5.
The speed settings are as follows: 5 = every 5 secs, 4 = every
10 secs, 3 = every 15 secs, 2 = every 30 secs and 1 = every
60 secs.
= Speed Control Button (Decrease): Tap to decrease the
blending speed, of the colors, to the minimum speed of 0.
= Speed Selector Icon: Tap
Speed: 1
speed for the light colors.
= Color Selector: Tap a color to select a single color.
= Back Button: Tap to go back to the previous menu.
= Invert Button: Tap to invert the display image.
= Exterior Light Button: Tap once to turn the lights on at a
high intensity. Tap again to turn the lights on at a low intensity.
Tap again to turn lights off. White is the only color option. The
lights have a timeout period of 8 hours. At start-up, the exterior
lights flash on and off to indicate a connection.
11.4

Music Menu

Models equipped with the optional Audio System offer an enhanced spa
experience. The BLUEWAVE® 2.0 Wireless Audio System works with
most Bluetooth® wireless devices. An auxiliary device can be connected,
via a 3.5 mm plug cable, located behind the front cabinet panel, if a
Bluetooth device is not available. These models also include four high
fidelity spa engineered speakers for unsurpassed sound quality and long-
life, and an integrated powered subwoofer for a superb acoustical sound.
Note: If the spa does not have the stereo option, there will not be a
button on the control panel.
To access the Music Menu, tap
change to Figure 11.4b. Once you enter the Music Menu, tap the power
button to turn the stereo on. Your connected electronic device, Bluetooth
or auxiliary, provides the audio entertainment.
WARNING:
EXISTS AND EQUIPMENT DAMAGE! Never install or
remove electrical devices while hands are wet or while sitting
partially immersed or fully immersed in spa!
42
, Figure 11.4a. The display will
RISK OF ELECTRICAL SHOCK HAZARD
or to select the blending