Programming And Operation Instructions - Jacuzzi J-485 Owner's Manual

J-400
3. Status:
• Cyan light - breathing (slow pulsing) indicates the status is good.
• Cyan light - flashing indicates that the system is completing a
connection to the cloud.
• Green light - flashing indicates waiting for a connection to the
cellular tower.
• Dark blue light - flashing indicates a SIM error.
4. Cell signal strength:
• 3 blue LED lights indicates cell signal strength.
C. Resetting the SmartTub™ controller
Should the SmartTub™ controller need to be reset, hold the magnet
(located on the cord) to the reset label on the side of the SmartTub
device.

12.0 Programming and Operation Instructions

Your Jacuzzi spa is equipped with setting menus that allow you to pro-
gram and activate different components of the spa. With our ProTouch
control panel, programming your spa has never been easier. In the sec-
tions that follow, we will guide you through the process of programming
the spa to fit your personal comfort. Tap
Figure 12.0a
Heat & Filter = Heat and Filter: Provides access to the heating and
Water Care = Water Care: Provides access to the water care
WiFi
= Wi-Fi: Provides access to the Wi-Fi programming, page
Lock = Lock: Provides access to the spa lock programming,
Time & Date
= Time and Date: Provides access to the time and date
48
6:45p
100
filtration programming, page 49.
programming, page 52.
55. Not applicable if the optional SmartTub™ system
is installed.
page 56.
programming, page 57.
to enter the Settings Menu.
SETTINGS
Units
Heat & Filter
Water Care
Figure 12.0b