Attach Thermostat To Sub-Base - Braeburn PREMIER Series Installer's Manual
Non-programmable thermostats, up to 2 heat / 1 cool heat pump 1 heat / 1 cool conventional, up to 3 heat / 2 cool heat pump, up to 2 heat / 2 cool conventional
Hide thumbs
Also See for PREMIER Series:
- Installer's manual (20 pages) ,
- User manual (20 pages) ,
- Detailed installer manual (17 pages)
Table of Contents
Advertisement
4
Attach Thermostat to Sub-Base
UP
1) Line up the thermostat body with the sub-base.
2) Carefully push the thermostat body against the
sub-base until it snaps in place.
NOTE: This thermostat ships configured as a 1H/1C conventional
thermostat. Confirm installer settings. See page 9.
UP
3) Insert Quick Reference Card into slot
on top of thermostat.
7
INSTRUCTIONS
Installer Guide
Advertisement
Table of Contents
