Unitech WD200 Work Instruction

Wearable terminal

Hide thumbs Also See for WD200:

Download this manual

Wearable Terminal

WD200 - Replace Battery

Work Instruction

Version 1.0

unitech is a registered trademark of unitech Electronics Co., Ltd.

All product and company names are trademarks, service marks, or registered trademarks of their respective owners

Android is a trademark of Google LLC.

Page 1 Version 1.0 © 2021 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. All product and company names are trademarks, service marks, or registered trademarks of their respective owners Android is a trademark of Google LLC.
Page 2: How To Replace The Battery
How to replace the battery Disassemble the back cover of WD200, the position of the screw is shown as below figure: After disassembling the screws and remove the back cover. © 2021 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 4 Please tear the battery release paper first as shown in the red rectangle in the below figure: Put the battery to WD200 and the battery yellow part near the wall(red arrow) and connecting the connector together as shown in the figure.
Page 5 Put the back cover of WD200 and lock the screw is shown as below figure: © 2021 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. All product and company names are trademarks, service marks, or registered trademarks of their respective owners...
Page 6 Key Part List ￭ Battery © 2021 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. All product and company names are trademarks, service marks, or registered trademarks of their respective owners...