Receiver - RCA VR564 User Manual

TV WITH RF JACK AND DIGITAL SATELLITE RECEIVER
This connection assumes:
l
You have a basic digital satellite system.
l
Your TV does not have audio/video input jacks.
This connection provides:
l
Mono sound playback from VCR.
l
Recording from a digital satellite receiver.
l
Recording one off-air or cable channel while watching another.
To use this connection, you must have:
l
(4) coaxial cables, (3) audio/video cables, and (1) Y-adapter
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the steps.
Using This Connection
l
Tune your TV to channel 3 or 4, whichever one you selected
with the 3 CH.4 switch on the back of the VCR.
l
To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the CH3KH4
switch on the back of the receiver. Turn off receiver.
l
To watch and/or record from the digital satellite receiver,
tune your VCR to its line input ("L" appears in display).
Auto TVNCR Setting:
l
Set the Auto TVNCR feature to ON.
To play a tape:
1. Insert a tape.
2. lf necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Turn off the digital satellite receiver and begin recording a
program using a recording feature.
2. Press TVWCR and select a different channel on the TV.
To record a digital satellite receiver program:
1. Turn on the receiver, tune the VCR to its line input, and begin
recording a program using a recording feature.
Caution
The unauthorized recording of satellite
broadcasts, television programs, or
other copyrighted materials may
infringe the rights of others.
SATELLITE SIGNAL
SATELLITE RECEIVER 1
VCR
/ r-