Table of Contents
Advertisement
PROGRAMMING
THE REMOTE
TO CONTROL
A
LASER DISC PLAYER OR DVD COMPONENT
The VCRZeDVD button
on the remote
is programmed
to control
a VCR set to respond to the VCR2 button
or an RCA, ProScan, or
GE laser disc player.
If you have an RCA DVD component,
you can program
the
VCRZ*DVD button
to operate
it.
1.
2.
3.
4.
5.
Turn on the component.
Look up your component
and its code number
in the code
list on the right.
Press and hold the VCRZ*DVD button
on the remote.
Enter the three-digit
code from the code list.
Release the VCRZ*DVD
button,
and press PWR. If the
component
turns off, setup is complete.
OPERATE
THE COMPONENT
After you have set up your remote,
see which buttons
will
operate
it.
1.
Point the remote
at the component,
and press. VCRZ*DVD.
If it does not turn on, press VCRZ*DVD and then PWR.
2.
You may want to experiment
to see which buttons
will
operate
your component.
Try pressing buttons,
such as CHAN
up or down.
RCA, ProScan, and GE Codes
VCR ......................................................
037
LaserDisc
Player .................................. 037
DVD ......................................................
078
I
This
remote
may not operate
all
models
of the brands
that
are shown.
1
Advertisement
Table of Contents
