Table of Contents
Advertisement
ABOUT PROGRAMMINGTHE
REMOTE
The remote
can be programmed
to control
another
brand of
remote
controllable
TV and a digital
satellite
receiver or cable
box. It can also be programmed
to control
an RCA or ProScan
DVD player and audio component.
It is already programmed
to
operate
most RCA, ProScan, and GE TVs, laser disc players, and
satellite
receivers.
PROGRAMMING
THE REMOTE
TO CONTROL
ATV
If the TV does not turn on when you press the TV button,
the
remote
needs to be programmed.
Follow these steps to program
the remote
to control
your
particular
TV
1.
Turn on the TV.
2.
Find your TV brand and code number(s)
on the code list on
the next page.
3.
Press and hold the TV button
on the remote.
4.
Enter the three-digit
code from the code list.
5.
Release TV, and then press CHAN up or down.
If the TV
responds to the remote
commands,
the remote
is
programmed.
6.
If the TV does not respond,
repeat these steps using the next
code in the list.
OPERATE
THE TV
After you set up the remote,
see which buttons
operate
your TV.
1.
Point the remote
at the TV, and press the TV button.
If the TV does not turn on, press the TV button
and then
press the PWR button.
2.
You may want to experiment
to see which buttons
operate
your TV. Try pressing buttons,
such as VOL and MUTE. See
"TV Function
Buttons"
in the VCR Basic Section for details.
I
7
This
remote
may not operate
all
models
of the brands
that
are shown.
Note
the difference
between
theTV
and
VCR
on-screen
displays
to see
which
one the remote
is operating.
36
Advertisement
Table of Contents
