Tv + Vcr + Satellite Receiver - RCA VRC440 User Manual

Chapter 1
15763820 (VRC440)(E) 04 S&C 9
TV
VIDEO
VCR
SATELLITE
RECEIVER
OUT
VIDEO
R L

TV + VCR + Satellite Receiver

Note: Your television and/or satellite receiver back panels may not look
exactly like the models shown here.
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on the
back of the VCR and the other end to the TV's antenna input jack.
2. Connect satellite receiver to the VCR
Connect one end of an RF coaxial cable (not included) to the antenna output
jack on the satellite receiver and the other end to the ANT. IN jack on the VCR.
3. Connect the antenna to your satellite receiver
If necessary, connect an antenna or cable box RF coaxial cable (not included) to
the antenna input jack on the satellite receiver.
4. Connect the satellite feed to the satellite receiver
Connect the satellite receiver's RF coaxial cable feed (not included) to the
satellite input jack on the satellite receiver.
Connections & Setup
AUDIO
L / MONO
R
IN
L
OUT
CABLE/
ANTENNA
S-VIDEO
1
ANT. IN
AUDIO
OUT IN
RF OUT
CH
3 4
VIDEO
2
IN FROM ANT
CH3
CH4
OUT TO TV
SATELLITE
IN
S-VIDEO
3
From Cable
or TV Antenna
5/25/01, 12:52 PM
4
From
Satellite
Go To Page 11
9