HP Z VR Backpack G1 Maintenance And Service Manual page 33

Hide thumbs Also See for Z VR Backpack G1:

Table of Contents

12.

Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same

procedure to remove both memory modules.

CAUTION:

To prevent damage to the memory modules, hold the memory modules by the edges only. Do

not touch the components on the memory modules.

To protect a memory module after removal, place it in an electrostatic-safe container.

Reverse this procedure to install a memory module.

IMPORTANT:

Memory modules are in a stacked configuration. If only one module is installed it must be in the

bottom memory socket.

Component replacement procedures

Table of Contents

Troubleshooting