Post Error Messages And User Actions - HP Z VR Backpack G1 Maintenance And Service Manual

operate in manual mode key sequence. To proceed with the repair, press and hold the following keys:
+<UP arrow>+<DOWN
policy to automatic. If this error reoccurs, a service event is required to identify the source of the error and take
appropriate corrective action.
NOTE: The computer will attempt to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an "Off" or "Hibernated" state, lights associated with the
num lock keys will both blink eight times followed by a pause, then continue in a repeating pattern.

POST Error Messages and User Actions

Test description
Product
information
Startup test
Startup test
Startup test
Startup test
Startup test
Run-in test
Run-in test
Run-in test
Run-in test
Run-in test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Boot Device
Manager
Boot Device
Manager
Boot Device
Manager
arrow>. To avoid the need for this manual recovery step, set the HP Sure Start recovery
Failure descriptions Error code
Invalid value 00A
Memory module 200
Hard Disk 1 SMART 301
Hard Disk 2 SMART 302
Hard Disk 1 Quick 303
Hard Disk 2 Quick 304
Memory module 200
Hard Disk 1 SMART 301
Hard Disk 2 SMART 302
Hard Disk 1 Quick 303
Hard Disk 2 Quick 304
Hard Disk 1 SMART 301
Hard Disk 2 SMART 302
Hard Disk 1 Quick 303
Hard Disk 2 Quick 304
Hard Disk 1 Full 305
Hard Disk 2 Full 306
Boot device not found 3F0
Hard Disk 1 Error 3F1
Hard Disk 2 Error 3F2
Possible user actions
Contact support for assistance.
Attempt to reseat the memory module and then repeat the test.
If the memory module still fails, contact support.
Attempt to reseat the hard drive and repeat the test.
The hard disk drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
Attempt to reseat the memory module and then repeat the test.
If the memory module still fails, contact support.
Attempt to reseat the hard drive and repeat the test.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
Attempt to reseat the hard drive and repeat the test.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
The hard drive may have failed. Contact support for assistance.
Indicates a potential problem with the hard drive. Please run the hard drive
test.
Indicates a potential problem with the hard drive. Run the hard drive test.
Indicates a potential problem with the hard drive. Run the hard drive test.
<ESC>
caps lock and
Additional information 87