Extron electronics ShareLink Pro 1100 User Manual page 25

1
Device Info — Use this panel to change the device hostname. Click Edit to enter a
new hostname, and click Save.
2 Device Status — Click Edit to change the device time, date, and timezone. Click
Sync to PC to automatically sync the device to the PC timezone.
3 Firmware — Use this panel to update the device firmware:
1. Click Select File to browse to the firmware file.
NOTE: The latest firmware file can be downloaded from the Extron website (see
Firmware Download
2. Select the firmware file, and click Update.
4
Network Settings — Click Edit to change the device name and the network settings
(IP address, subnet, and gateway IP address) for the LAN port.
5
Roles and Permissions — Click Edit to change the following passwords:
NOTE: The factory configured password for all accounts have been set to the
device serial number. Passwords are case sensitive. Performing a
Factory Defaults
Admin password (default: extron) — This password is used for accessing the
•
admin page.
Moderator password (default: moderate) — This password is required to
•
moderate a session.
Participant password (default: no password) — This password is required to
•
participate in a session.
Enter and confirm the new password, and click Save.
6 LinkLicense — Use this panel to upload the LinkLicense file to the
ShareLink Pro 1100:
NOTE: A LinkLicense unlocks the Expo feature (streaming capability) for the
ShareLink Pro 1100. To redeem (activate) a LinkLicense, go to
www.extron.com/llredeem
If a LinkLicense has been purchased, upload the file as follows:
a. Click Select File and browse to the LinkLicense (.ell) file on your computer.
b. Click Add to upload the file.
Expo — Click Edit to open the Expo Settings page (see the next page).
7
on page 81).
(see page 7) sets the password to the defaults shown below.
and follow the online instructions.
ShareLink Pro 1100 • Operation Using a Computer
Reset to
18