Recording Tuner / Aux To Usb Device; Stop Recording; Deleting All Files; Mp3 Player - RCA RS2052 User Manual

RS2052 EN 4/12/05 11:33 AM Page 28
Recording to the mp3 Player
Recording Tuner / AUX to USB
EN
Device
1. In Tuner or AUX mode, press RECORD to start
recording.
The RECORD icon lights on the display.
Example:
1. In radio mode, select the station to record
(refer to page 19 for details).
2. Press RECORD to start recording.
3. Press STOP to stop recording.
In Tuner mode Recording
FM001.MP3
90.50MHz 00:10
2:56:20
Note:
The encoding bitrate for tuner, CD
and AUX signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
21
Deleting Files from mp3 Player
1. In navigation mode, select the file to delete
using the navigation buttons (Refer to
"Navigation Controls" for details.)
Song 1
Song 2
Song 3
2. Press DELETE on the main unit or DEL on the
remote control.
Delete?
No
> Yes
3. Rotate the Volume button on the main unit or
press UP or DOWN on the remote
control to select Yes to delete or No to cancel.
4. Press SELECT on the main unit or RIGHT /
ENTER on the remote control to confirm
selection.
If Yes is selected, the display shows memory
usage information after deleting selected file
for a few seconds, then returns to navigation
menu.
Mem Usage Song 1
141M Used Song 3
115M Free

Deleting All Files

In navigation mode, press and hold DELETE on
the main unit or DEL on the remote control to
delete all the files on the mp3 player or memory
card.

mp3 Player

Insert battery into the player

1. To insert battery, push the battery door away
from the unit and lift the battery door out.
2. Insert a "AAA"(UM4) battery with polarities
corresponding to the indications in the
compartment.
(Refer to "Before You Begin" for important
battery information.)
3. Replace the door to the battery compartment.
Note:
This unit may temporarily cease to function
if subjected to electrostatic disturbance.
To resume normal operation, it may be
necessary to cycle the power off and back
on or to remove and reinstall the batteries.
Connecting the Lyra Player to
your Audio System
1. Slide the USB cover down to show the USB
connector on the back of the player.
2. Insert the USB connector into the USB socket
on the top of the Audio System.
22
EN