Recording To The Mp3 Player/Usb; Recording Cd To Mp3 Player; Recording Tuner/Aux To Mp3 Player - RCA RS2100 User Manual

RS2100 EN (04_07_06)

Recording to the mp3 Player/USB

Recording to mp3 player or USB device are
basically the same. You can record CD, Tuner or
AUX files to the mp3 player or USB device.

Recording CD to mp3 Player

Normal/High Speed Recording
1. Connect the mp3 player to the USB port, "USB
Connected" will show on the display of the
player.
2. In CD stop mode or CD navigation mode, press
RECORD-MP3 PLAYER on the main unit or
press REC
control.
3. Press ,
select Normal or High Speed.
4. Press , RECORD-MP3 PLAYER on the main
unit or press REC
control to confirm selection.
5. Press , ,
then press
The unit will start playback and recording will
begin. REC is displayed.
6. Press , press RECORD-MP3 PLAYER on the
main unit or press REC
remote control to stop recording.
Note:
High speed recording mode can save
time when recording from CDs. It is normal
that the pitch is increased during high speed
recording.
Example (Record all 5 CDs):
1. Make sure ALL DISCS mode is selected by
pressing REPEAT repeatedly.
2. Follow the above step 1-6.
Example (Record only selected
tracks from a CD):
1. Create a CD program by following instructions
under "Setting Up a CD Program" on page 15.
2. In CD stop mode or CD pause mode, press
RECORD-MP3 PLAYER on the main unit or
press REC
control.
3. Press ,
select Normal or High Speed.
7/7/06 11:29 AM
P. PLAYER on the remote
or rotate VOLUME CONTROL to
P. PLAYER on the remote
or to select track and
.
P. PLAYER on the
P. PLAYER on the remote
or rotate VOLUME CONTROL to
Page 19
4. Press , RECORD-MP3 PLAYER on the main
unit or press REC
control to confirm selection.
5. Press PROG to enter program playback mode.
Playback and recording will begin. PROGRAM
and REC is displayed.
6. Press , press RECORD-MP3 PLAYER on the
main unit or press REC
remote control to stop recording.
Tips:
To view remaining time (Rem), press
BAND/INFO in recording mode.
Tips:
If CD playback is already started,
recording will begin instantly when
RECORD-MP3 PLAYER on the main unit or
REC P. PLAYER on the remote control is
pressed.
If CD playback is stopped, select Normal/High
speed using or
confirm selection. Press
select track and then
Recording will not start until CD starts
playback.
Tips:
Recording stops automatically when
CD stops (For example: end of disc is reached).
Note:
The encoding bitrate for tuner, CD and AUX
signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
P. PLAYER on the remote
P. PLAYER on the
then press to
, , or to
to start recording.
12
EN