Table of Contents
Advertisement
Chapter 4 Operation Method
3. To permit or prohibit remote access, enter the password and tap the [Enter] button. The
permission is changed, and the successful completion message is displayed.
If remote access is prohibited during remote accessing, the connection is disconnected.
[Information]
The factory default password is "0000". Manage the password by the ship administrator.
About how to enter a number, see "4.1.5 Number input".
Completion message
Figure 4-51 Permit remote access
[Information]
If the password is incorrect, the error message is displayed. Enter the password again.
Error message
Figure 4-52 Incorrect password error
[Information]
When remote access is permitted and remote access from shore system is initiated, the
following information is displayed.
Figure 4-53 Information: Remote access
65
Advertisement
Table of Contents
