Table of Contents
Advertisement
Precautions
This equipment has warning labels.
Do not try to remove, break or modify the label.
Do not install the equipment on the location where infringed by water, humidity,
steam, dust, or soot.
Otherwise, it may cause a fire, electric shock, or malfunction.
Do not touch this equipment, if hands or gloves are wet with water.
Otherwise, it may cause an electric shock, or a malfunction.
Be sure to hold power supply plug when pulling it out of socket
Pulling the power cable without holding the plug may damage the cable and may
cause a fire or an electric shock.
Although the shape of power socket is for 100VAC, it directly outputs the voltage
(100 to 220VAC) that is being input to the RCU. Do not connect equipment for
100VAC, if 220VAC is being input. Otherwise, a malfunction may occur.
If the equipment is splashed with freshwater or seawater, wipe it immediately.
Otherwise, it may cause a failure or operational malfunctions.
Do not use any organic solvents such as thinner or benzine to clean the surface.
These agents can damage the surface coating.
Be sure to remove dirt and dust from the surface and wipe it using a clean dry cloth.
Do not carry out the tap of the screen by the sharp object.
Otherwise, the screen may be damaged.
xvii
CAUTION
!
Advertisement
Table of Contents
