Battery Safety Precautions; Belt Clip And Optional Headset; Connecting The Belt Clip; Connecting Optional Headset To The Handset - RCA 23200RE3 User Manual

Basic Information
If you don't charge the handset battery properly (for 16 hours) when you first set up the phone
and/or when you install a new battery pack, the battery 's long-term performance will be
compromised.
NOTE: If the battery is not properly installed in the handset, or if the battery pack is not properly
connected to the jack inside the battery compartment. "NO BATTERY" shows in the display when
the handset is placed in the charging cradle.

Battery Safety Precautions

• Do not burn, disassemble, mutilate or puncture. Like other batteries of this type, toxic materials
could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.

Belt Clip and Optional Headset

Connecting the Belt Clip

1. To attach the belt clip, insert the sides of the belt clip into the slots
on each side of the handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset to the Handset
Each handset can be used with an optional headset hands free
operation.
1. Connect the headset to the headset jack on the side of the
handset The handset receiver and microphone are disabled when
the headset is connected.
2. Adjust the headset to rest comfortably on top of your head and
over your ear. Move the microphone to approximately two to three
inches from your mouth.
3. Press the home button or cell button to answer a call or make calls
using the headset.
4. To return to normal operation, unplug the headset from the jack.
38
NOTE: The RBRC seal on the battery used in your
ATLINKS USA, Inc. product indicates that we are
participating in a program to collect and recycle
Nickel Cadmium batteries throughout the
United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.
Slot for belt clip
Headset plug
Headset jack