Exit; Paging From The Base/Group Page; Hold; Mute - RCA 23200RE3 User Manual

Basic Operation
2. Press the redial button. The number dials automatically through the land line.
-OR-
3. Press the redial button first, then use the CID/vol or buttons to select the desired redial number.
- Press CID/volto review the oldest call and scroll toward the most recent calls (higher numbers).
- Press CID/volto review the newest call and scroll to older calls (lower numbers).
NOTE: You may choose from three last dialed numbers.
4. Press the home or cell button. The number dials automatically through the land or cell line.
If, when using the telephone land line, you get a busy signal and want to keep dialing the number,
press the redial button to quickly redial the number.

Exit

Press the flash/exit button to exit a menu function and return to the standby screen.
Page
The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must
be registered. If your handset is not registered, follow the instructions in the "Registration" section of
this manual.

Paging from the Base/Group Page

Use the base to page any registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and PAGING FROM BASE
shows on each handset's display.
2. To cancel the page, press the page button on the base, or press the home button or flash/exit
button on each handset.

Hold

1. Press the hold button on the handset to put a call on hold. LINE ON HOLD shows on the display
for land line calls. CELL ON HOLD shows on the display for cell calls.
2. To take the call off hold, press the hold button again.
NOTE: To switch a land line call on hold from one handset to another, refer to the section
"Transferring External Land Line Calls to Other Handset."

Mute

To have a private, off-line conversation, use the MUTE feature. The party on the telephone line
cannot hear you, but you can hear them.
1. Press the prog/mute button. The handset display shows MUTE ON.
2. Press the prog/mute button to cancel and return to your phone conversation.

Receiver Volume Control

When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the
CID/vol or buttons. There are four volume levels to choose from. When the maximum or
minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.
28