Key Tone; Area Code; Handset Registration - RCA 23200RE3 User Manual

Cellular phone docking system with 2.4 ghz cordless handset
Table of Contents

Advertisement

Available languages

Available languages

Key Tone

1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to the KEY TONE menu.
6. Press prog/mute button to enter the menu. SET KEY TONE 1ON 2 OFF shows in the display.
7. Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol or buttons to
scroll to your selection. 1ON is the default setting.
8. Press the prog/mute button to confirm and the key tone setting shows in the display.

Area Code

1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to the AREA CODE menu.
6. Press prog/mute button to enter the menu. SET AREA CODE - - - shows in the display.
7. Use the touch-tone pad to enter your 3-digit area code.
8. Press the prog/mute button to confirm. You will hear a confirmation tone and the new area code
shows in the display.
NOTE: To restore the default setting to - - -, press and release the delete button when "SET AREA
CODE" shows in the display.

Handset Registration

Your handset is pre-registered and ready to use. It is not recommended that handset be registered
again unless absolutely necessary.
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to the REGISTRATION menu.
6. Press prog/mute button to enter the menu. REGISTRATION 1YES 2NO shows in the display.
7. Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol or buttons to
scroll to your selection. 2NO is the default setting.
Programming the Handset
21

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

23200

Table of Contents