Advertisement
2023 O2 VAM
Apply Loctite 243 on bolt threads. Thread the
bolt in but do not tighten, this will allow the
insert to align when installing the axle
Remove the thru-axle and remove the hub.
Install the rear wheel and tighten the
thru-axle (with the nylon washer) to 12Nm.
Install a rear hub in the dropout with the free
hub on non-drive side. This will allow better
access for the next step. Install the thru-axle
with the nylon washer and tig hten to 12Nm.
After ensuring the dropout insert is correctly
aligned, tighten the dropout bolt to 1 Nm.
Advertisement
