Sony PXW-X400KF Operating Instructions Manual page 19

000 19
1. Overview: Screen Display
Icon Meaning
Spotlight mode
33.
Auto focus mode indicator (when an auto
focus lens is attached only)
Displays the focus adjustment mode of the
camcorder.
ˎ AF (auto focus) ˎ
ˎ MF (manual focus) ˎ
ˎ MF* (manual focus with MF assist function on) ˎ
ˎ Full MF (full manual focus) ˎ
34.
ND filter indicator
Displays the position number of the currently
selected ND filter (page 5).
When "Electrical CC" is assigned to an assignable
switch, the position (A/B/C/D) of the electrical
CC filter is displayed on the right of the ND filter
indicator (1 to 4).
35.
Gain indicator
Displays the gain setting (dB), set using the GAIN
switch, of the video amplifier.
36.
Shutter mode/shutter speed indicator/Flash
Band Reduce status indicator
Displays the shutter mode or shutter speed.
"Setting the Electronic Shutter" (page 39)
If Flash Band Reduce (page 98) is set to On in
the Operation menu, FBR is displayed when the
shutter is in a non-operating state.
37.
White balance mode indicator
Displays the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:C: Memory C mode
W:P: Preset mode
3200K: Appears when an assignable switch
assigned with Color Temp SW 3200K is on
4300K: Appears when an assignable switch
assigned with Color Temp SW 4300K is on
5600K: Appears when an assignable switch
assigned with Color Temp SW 5600K is on
6300K: Appears when an assignable switch
assigned with Color Temp SW 6300K is on
Lens Supplied with the PXW-X400KC
The PXW-X400KC is supplied with a lens.
6
5
4
3
2
1
1.
DIP switches (page 20)
Used for the shuttle shot function.
2.
Iris gain adjustment trimmer (page 41)
3.
Iris push auto switch
When the iris mode switch is in the M (manual)
position, press this switch for instantaneous auto
iris adjustment. The iris is automatically adjusted
while the switch is held down.
4.
Iris mode switch
A (auto): The iris is adjusted automatically.
M (manual): Adjust the iris with the iris ring.
5.
Zoom seesaw switch
This is enabled when the zoom servo/manual
knob is in the SERVO position. Set to the W (wide
angle) position when you want wide-angle, and
set to the T (telephoto) side when you want
telephoto.
Press the switch harder for a faster zoom action, or
softer for slower zoom action.
7
8
9
10
11
12
6.
RET switch
While pressed, the last few seconds recorded
appear on the viewfinder screen (Rec Review)
(page 21).
7.
F.B. lock screw / F.B. adjustment ring
(page 41)
8.
Positioning pin
When attaching the lens, align this pin with the
recess in the top center of lens mount on the
camcorder.
9.
Macro button / macro ring
Press and hold the macro button and turn the
macro ring to adjust the focus (minimum focus
distance: 10 mm).
10.
Iris ring
For manual iris adjustment, set the iris mode
switch to the M (manual) position, then turn this
ring.
13
14
15
16
17
18