Sony PXW-X400KF Operating Instructions Manual page 11

000 11
1. Overview: Name and Function of Parts
14.
TC OUT (timecode output) connector (BNC
type)
To lock the timecode of an external VTR to
the timecode of this camcorder, connect this
connector to the external VTR's timecode input
connector.
Tally Indicator and Connector Section
1
2
3 4 5 6
1 7 8 9 10
1.
TALLY (back tally) indicator (red)
Lights up during recording. It will not light if the
TALLY switch is set to OFF. It also flashes when the
WARNING indicator operates. The tally indicator on
the front of the viewfinder and the REC indication
on the viewfinder screen light or flash in the same
manner.
"Error/Warning System" (page 132)
2.
TALLY switch
Set to ON to activate the TALLY indicator function.
3.
EARPHONE jack (stereo, minijack)
You can monitor the E-E sound during recording
and playback sound during playback. When an
alarm is indicated, you can hear the alarm sound
through the earphone. Plugging an earphone into
the jack automatically cuts off the built-in speaker.
You can select monaural or stereo using
Maintenance >Audio >Headphone Out in the
setup menu.
[Note]
Use monaural (2-pole) or stereo (3-pole) type earphones. Use
of other earphones may damage the camcorder.
4.
AUDIO IN selector switch
Select the audio source you connect to the AUDIO
IN CH1/CH2 connectors.
LINE: When connecting a stereo amplifier or other
external audio signal source
AES/EBU: When connecting an external digital
audio signal source
MIC: When connecting a microphone.
5.
+48V/OFF (+48V external power source on/
off) switch
Switch between the following settings, according
to the microphone used for audio input.
+48V: Microphone requiring external power
source (phantom power)
OFF: Microphone using internal power source or
11
not requiring a power source
6.
SDI IN (SDI input) connector (BNC type)
Connector used when connecting an external SDI
signal source to the camcorder.