Transferring Files - Sony PXW-X400KF Operating Instructions Manual

000 66
5. Network Configuration

Transferring Files

You can transfer proxy files recorded on an SD card
and original files recorded on SxS memory cards
to a server on the Internet when connected to the
Internet via a 3G/4G/LTE network, access point, or
wired LAN router.
Preparation for Transfer
1
Connect the camcorder to the Internet using
the procedures in "Connecting Devices using
Wireless LAN" (page 59) and "Connecting to
the Internet" (page 63).
2
You must first register a server to which you
want to transfer files.
For details about registering a server, see "To
register a new destination server" (page 75).
Transferring
You can select proxy files on an SD card or original
files on SxS memory cards for transfer to a server.
Transferring proxy files on an SD card
1
Connect the camcorder and device using a
LAN connection, then launch a browser on the
device to access the camcorder.
2
Display a file list screen to select files.
3
Tap and select [Media Info], then tap [SD
Card].
The SD Card screen appears.
Using "Content Browser Mobile" application
version 2.0 or later, you can quickly display a
thumbnail for a proxy file on an SD card by
using the still image of the first frame.
4
Select the files you want to transfer.
Tap a file to select it. Tap a file a second time to
de-select it. You can double-tap a file to play
the file to check its content.
5
Tap [Transfer].
The default destination server specified in
[Default Setting] appears (see "To register a
new destination server" (page 75)).
To change the destination server, tap the
destination server to display a list and then
select a different server. Enter the directory on
the destination server, as required.
6
Tap [Transfer].
Transfer of the selected files begins. To cancel
file transfer, tap [Cancel].
Transferring automatically when recording
finishes
If Maintenance >File Transfer >Auto Upload(Proxy)
in the setup menu is set to On beforehand, the file
is automatically uploaded to the specified server
when proxy recording finishes.
If a proxy file with an identical duration as the
original file, inheriting the information from
the original file, is recorded based on planning
metadata, a folder is created on the transfer
destination with a name defined by the content of
the <Title> tag of the planning metadata file, and
the proxy file is transferred to that folder.
When transferring, the ID of the recording media
is automatically appended to the file name of the
planning metadata file.
Transferring parts of proxy files
Using "Content Browser Mobile" application
version 2.0 or later, you can specify In/Out points in
proxy files to cut out and transfer the cutout parts.
You can also transfer the cutout portions of
multiple files using the Storyboard.
[Notes]
ˎ Margins of up to 15 frames are added before and after the ˎ
cutout region in the created file.
ˎ Files created from cutouts from proxy files recorded using
ˎ
network function software (V1.25 or earlier) may not be
imported into non-linear editors.
ˎ When partial transfer is performed using the Storyboard, ˎ
the file for sending Storyboard information to a non-linear
editor is displayed in the Job List.
ˎ When transferring, a General/Sony/tmp folder is created
ˎ
automatically on the SD card. The file is temporarily stored
in this folder, and is automatically deleted after the file
transfer is completed.
Transferring original files on SxS memory cards
1
Connect the camcorder and device using a
LAN connection, then launch a browser on the
device to connect to the camcorder
"Connecting Devices using Wireless LAN"
(page 59).
2
Select Maintenance >File Transfer >File
Transfer in the setup menu.
3
Turn the MENU knob to select [Execute], then
press the knob.
File transfer mode is initiated.
4
Display a file list screen to select files in the
browser on the device.
5
Tap and select [Media Info], then tap Slot A
(for files recorded on media in slot A) or Slot B
(for files recorded on media in slot B).
The Slot A or Slot B screen appears.
Example: Slot A screen
6
Select the files you want to transfer.
Tap a file to select it. Tap a file a second time to
de-select it.
7
Tap [Transfer].
The default destination server specified in
[Default Setting] appears (see "To register a
new destination server" (page 75)).
To change the destination server, tap the
destination server to display a list and then
select a different server.
Enter the directory on the destination server in
[Directory].
8
Tap [Transfer].
Transfer of the selected files begins. To cancel
file transfer, tap [Cancel].