Sony PXW-X400KF Operating Instructions Manual page 16

000 16
1. Overview: Screen Display
Viewfinder Screen
The viewfinder screen displays images during
shooting (recording or recording standby)
7
1 2 3 4 5 6
37
36
35
34
33
32
31
30
29
28 27 26
1.
Extender indicator
Displays the status of the digital extender function
and lens extender function.
EX: Appears when the lens extender function is ON
X2D: Appears when the digital extender function
(×2) is ON
X3D: Appears when the digital extender function
(×3) is ON
X4D: Appears when the digital extender function
(×4) is ON
EX2D: Appears when both the lens extender
function and digital extender function (×2) are
ON
EX3D: Appears when both the lens extender
function and digital extender function (×3) are
ON
and playback with camcorder information
superimposed on the display.
You can toggle the display of information on/off
using the DISPLAY switch.
The information to display is linked to the settings
in Operation >Super Impose in the setup menu,
and the settings of the corresponding switches.
8 9 10 11 12
25 24
EX4D: Appears when both the lens extender
function and digital extender function (×4) are
ON
Turn the digital extender on/off using an
assignable switch assigned with the Digital
Extender function.
[Note]
The digital extender cannot be turned on when Slow & Quick
Motion is enabled.
2.
Zoom position indicator (with lens mounted)
Displays the zoom position of the zoom lens in the
range 0 to 99.
3.
Color temperature indicator
Displays the color temperature of the white
balance.
4.
Focus position indicator (with lens mounted)
Displays the focus position as a distance to the
subject (unit: meters).
5.
Iris position indicator (with lens mounted)
Displays the iris position setting.
6.
Electric color temperature filter indicator
Appears when the CC5600K function is on.
7.
Depth of field indicator (serial lens mounted)
Displays the depth of field using a bar. The units
for display are set using Operation >Display On/Off
>Lens Info in the setup menu, and can be set to
13
meters or feet.
14
15
8.
Recording mode indicator
16
Displays the following recording operation states
17
of the camcorder.
18
19
Indicator Meaning
20
Rec
During recording
21
22
Stby Recording standby
Cont Rec Clip continuous recording in
23
progress
Cont Stby Recording standby in clip continuous
recording mode
S&Q Rec
Recording in progress in Slow &
Quick Motion mode
S&Q Stby Recording standby in Slow & Quick
Motion mode
Rec Recording in picture cache mode
Cache
Recording standby in picture cache
mode
Int Rec
Recording in progress in Interval Rec
mode
Int Stby Recording standby in Interval Rec
mode
Int Stby Recording paused in Interval Rec
mode (during pause intervals)
Sml Rec
Recording in progress in Simul Rec
mode
Sml Stby Recording standby in Simul Rec
mode
Indicator Meaning
CALL Call received from external
connected device
Green tally is displayed when the camcorder is in
the following states.
ˎ Maintenance >Camera Config >HD-SDI Remote ˎ
I/F is set to Green Tally in the setup menu and a
recording control signal is output from the SDI
OUT connector.
ˎ Green tally signal received (when a camera ˎ
adaptor is mounted on the camcorder and a
camera extension unit is connected)
9.
Wireless receiver function indicator
Displays "W" when a slot-in receiver is attached to
the camcorder, and displays the reception level
for each channel that can be used by the receiver
(1ch, 2ch, or 4ch).
Normal: Displays the strength of the received
signal level by the number of white segment
indicators.
Analog receiver muting/Digital receiver error rate
warning: Displays the strength of the received
signal level by the number of gray segment
indicators.
If the received level exceeds the peak: Displays "P"
in place of the indicator. 1)
Receiver battery is low: The corresponding channel
number and indicators flash.
1)
1) When using the DWR-S02D
10.
S&Q Motion (Slow & Quick) frame rate
indicator
Displays the shooting frame rate when the
camcorder is set to Slow & Quick Motion recording
mode.
11.
GPS indicator (page 57)
12.
Battery capacity/voltage display
Displays the following indicators according to the
type of battery power source.