Upgrading Firmware From Usb - FLIR DNR800 Series Instruction Manual

14 Using the Main Menu
To reset the system to factory default settings:
1. From the Main Menu, click and then click Setting>Default.
2. Check the menus you would like to reset to default settings.
3. Click OK.

14.3.28 Upgrading Firmware from USB

Firmware upgrades provide enhanced functionality. The system will automatically check
for firmware upgrades if it is connected to the Internet. The system also supports firmware
upgrades from a USB thumb drive (not included).
To upgrade firmware from a USB drive:
1. Download the firmware upgrade from www.flir.com/security/support.
2. Extract the firmware file and copy the firmware to a blank USB thumb drive.
NOTE
Do not have any folders on the USB thumb drive—just the firmware file.
3. Insert the USB thumb drive to a USB port on the system.
4. Right-click and then click Main Menu. Click >Setting>Upgrade.
5. Click Start.
78
#LX400085; r. 1.0/38426/38427; en-US