Modes Of Operation; Thermostatic Mode; Program Mode - Maxitrol GV60 Installation And Operating Instructions Manual

OPERATING INSTRUCTIONS

MODES of OPERATION

AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2

THERMOSTATIC MODE

AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2
Thermostatic Mode
The room temperature is measured and
compared to the set temperature. The
flame height is then automatically ad-
justed to achieve the set temperature.

Program Mode

Programs 1 and 2, each can be pro-
grammed to go on and off at specific
times at a set temperature.
ON:
Press button. displayed, preset tem-
perature displayed briefly, and then room
temperature displayed.
OFF:
1. Press button.
2. Press or button to enter Manual
Mode.
3. Press button to enter Program Mode.
SETTING:
1. Press button and hold until
played, temperature flashes.
2. To adjust set temperature press
button.
3. To confirm press button or wait.
PROGRAM MODE
AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2
NOTE: The set temperature for Thermostatic Mode is the tem-
perature for the on time in Program Mode. Changing the
Thermostatic Mode set temperature also changes the
on time temperature in Program Mode.
Default settings:
ON TIME (Thermostatic) TEMPERATURE: 70 °F / 21 °C
OFF TIME TEMPERATURE: "
AM
PM
ON
OFF
1 2
dis-
or
NOTE: The on (Thermostatic) and off set temperatures are the
same for each day.
AM
PM
ON
OFF
1 2
FOR OEM USE ONLY
ON:
Press button. , or ,
displayed.
OFF:
1. Press or or button to enter
Manual Mode.
2. Press button to enter Thermostatic
Mode.
" (pilot flame only)
TEMPERATURE SETTING:
1. Press button and hold until
shes. and set temperature (setting
in Thermostatic Mode) displayed.
2. To continue press button or wait.
, displayed, temperature flash-
es.
3. Select off temperature by pressing
the or button.
4. To confirm press button.
DAY SETTING:
5. flashes. Press or
choose between ,
, , .
6. To confirm press button.
or
fla-
button to
, , , , ,
21 / 33