OPERATING INSTRUCTIONS
LIGHT / DIMMER OPERATION
AM
NOTE:
The Light works independently of the Pilot flame. If you
want the light on but no flame, press
MYFIRE APP
NOTICE
Before the App can be used, the myfire Wi-Fi Box must be wired
and plugged into mains power according to myfire App setup
diagram (see figure 20, page 12), and the App setup must be
completed (see myfire App setup, page 15).
AM
PM
ON
OFF
1 2
ON:
Press
button (
displayed). Light is
on at preset level.
OFF:
Press
button ( disappears).
SETTING:
1. Press
button and hold until flash-
es.
2. To adjust light between 20...100 %
press
or
button.
3. To confirm setting either press
ton or wait ( displayed).
button.
If Thermostatic, Program or Eco Mode
is activated, the corresponding icon and
"
" is displayed on the handset.
The modes can be operated according
to the descriptions on previous pages.
NOTE:
In Manual Mode "
displayed on the handset.
but-
" is NOT
FOR OEM USE ONLY
31 / 33