Myfire App - Maxitrol GV60 Installation And Operating Instructions Manual
Bridge
Hide thumbs
Also See for GV60:
- Operating instructions manual (52 pages) ,
- Installation and operating instructions manual (43 pages) ,
- Advanced troubleshooting (57 pages)
Table of Contents
Advertisement
OPERATING INSTRUCTIONS
selected
AM
PM
ON
OFF
1
2
AM
PM
ON
OFF
1
2
NOTE:
Either continue to PROGRAM 2 and set on and off times
or stop programming at this point, and PROGRAM 2 re-
mains deactivated.
NOTE:
PROGRAM 1 and 2 use the same on (Thermostatic) and
off temperatures for
, , ). Once a new on (Thermostatic) and / or off tem-
perature has been set, that temperature becomes the new
default setting.
NOTE:
If
,
or Daily Timer are programmed for PRO-
GRAM 1 and PROGRAM 2 on and off times, these be-
come the new default times. The batteries must be re-
moved to clear the PROGRAM 1 and PROGRAM 2 on
and off times and temperatures.
or Daily Timer ( , , , , , , ) selected
▪ Set on time and off time using same procedure as "
lected" (above).
▪
: Set on time and off time for both Saturday and Sunday.
▪ Daily Timer: Unique on and off times may be set for a single
day of the week, for multiple days of the week, or for every day
of the week.
▪ Wait to finish setting.
22 / 33
ON TIME SETTING (PROGRAM 1):
7.
, ,
displayed,
shortly, and hour flashes.
8. To select hour press
or
9. To confirm press
button.
displayed,
displayed shortly,
and minutes flash.
10. To select minutes press
ton.
11. To confirm press
button.
OFF TIME SETTING (PROGRAM 1):
12.
, ,
displayed,
shortly, and hour flashes.
13. To select hour, press
14. To confirm press
button.
displayed,
displayed short-
ly, and minutes flash.
15. To select minutes press
ton.
16. To confirm press
button.
,
and Daily Timer ( , , , ,
MYFIRE APP
NOTICE
is displayed
Before the App can be used, the myfire Wi-Fi Box must be wired
and plugged into mains power according to myfire App setup
button.
diagram (see figure 20, page 12), and the App setup must be
, ,
completed (see myfire App setup, page 15).
or
but-
ON
OFF
1 2
is displayed
or
button.
, ,
or
but-
se-
If Thermostatic or Program Mode is ac-
tivated, the corresponding icon and
AM
"
" is displayed on the handset.
PM
The modes can be operated according
to the descriptions on previous pages.
NOTE:
In Manual Mode "
displayed on the handset.
FOR OEM USE ONLY
" is NOT
Advertisement
Table of Contents
