Installing The System Fan - Dell P118G Service Manual

About this task
The figure indicates the location of the system fan and provides a visual representation of the removal procedure.
Steps
1. Locate the system fan on your computer.
2. Unroute the cable and release the wireless cable.
3. Disconnect the system fan cable from the connector on the system board.
4. Remove the two (M2x3) screws that secure the system fan to the palmrest assembly.
5. Lift the system fan off the palmrest assembly.

Installing the system fan

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the system fan and provides a visual representation of the installation procedure.
Disassembly and reassembly 45