Display hinges
Removing the display hinges
Prerequisites
1. Follow the procedure in
Before working inside your
computer.
2. Remove the
Display
assembly.
About this task
The figure indicates the location of the display hinges and provides a visual representation of the removal procedure.
Steps
1. Remove the six (M2.5x2.5) screws on either side securing the hinges to the back cover.
2. Angle the hinges and lift the hinges up and away from the back cover.
Installing the hinges
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the component and provides a visual representation of the installation procedure.
Disassembly and reassembly
65