Steps
1. Re-adhere the coin-cell battery to the slot on the palmrest assembly.
2. Route the coin-cell battery cable through the routing guide.
3. Connect the coin-cell battery cable to the system board.
Next steps
1. Connect the
battery
cable.
2. Install the
base
cover.
3. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the
battery
About this task
The figure indicates the location of the WLAN card and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
cable.
computer.
computer.
Disassembly and reassembly
39