Safety Instructions - Aaronia NF-5030S Manual

Table of Contents

1.0 Safety instructions

ATTENTION:

Always screw antennas and adapters always in a non-violent way. Please

use for loosening or screwing of SMA connections ONLY the enclosed

SMA tool, which offers an over-tightening protection.

Don't bring ever the analyzer in contact with water. Don't use it if it is raining. The

sensitive electronic system could otherwise be damaged.

Avoid excessively high temperatures. Do not leave the device on heating radia-

tors, in direct sunlight or in your car.

Due to the high sensitivity, the sensors and display of this device are shock-sen-

sitive, therefore it should be handled with care. Don't let the device or antennas,

falling down as they could be damaged or destroyed!

Consequently, we strongly recommend to usw our special transport case

for storage and transportation. It is also available as a very durable versi-

on made of special plastics (available at an extra charge).

Even though all SPECTRAN models are pretty safe due to their counter-sunk

screws, they should not be kept in the reach of children, as they might be a

potential threat in this case!

Your measurement device is maintenance-free. Only clean it outside with a

damp cloth. Do not use any cleaning supplies.

ATTENTION:

The device may only be operated without a power supply unit - no continuous

operation

WARNING:

Avoid overloading the input by applying signals with excessive power as

otherwise the highly-sensitive circuitry could be destroyed! The maxi-

mum applicable voltage is only 200mV (0.2V). Voltages bigger than 1V can

destroy SPECTRAN's highly sensitive amplification circuitry!

Table of Contents

Spectran nf