The Main Menu - Aaronia NF-5030S Manual

Table of Contents

7.0 The main menu

The marker blocks 1-3 continuously display the following information:

START, CENTER and STOP frequencies (as integers in Hz, kHz or MHz)

In the next line, the current settings for Range, MrkLvl and Reflev are display-

ed.

This is very practical: For example, you can query the current frequency

range (among other settings) at any time during a measurement by just pres-

sing the menu button. After you have checked the current values, please just

press the menu button again and the measurement will continue without any

changes in settings.

To step through the menu entries, use the up/down arrow keys or the

jog dial.

To activate the currently highlighted menu entry, press the enter key. Now

you can change the current setting by using the keypad, or make a selection

by using the up/down arrow keys. To confirm your entry or selection, press

Enter once again, and you will come back to the menu.

All changes will only take effect after you leave the menu completely.

A complete step-by-step description of each menu entry follows.

By pressing the menu key, you go directly to the

heart of SPECTRAN: the menu system.

Here, you can control the entire device, change various

settings, but also starting the datalogger or save and

recall your own programs. By pressing the menu button

again, you can exit the menu at any time.

SPECTRAN's easy to operat menu system works as fol-

lows:

The currently selected menu entry is shown in inverse

(dark background), as can be seen in the example on

the left ("Center").

The setting of the currently highlighted menu entry is

always shown as "clear text" in the large info field at the

top - in this example it is the currently configured center

frequency ("940"). This avoids the need for tiresome,

one-by-one activation of menu entries to browse values.

Table of Contents

Spectran nf