Pelican StealthLite 2400, 2400 - Flashlight Quick Manual

BATTERY INSTALLATION

1. Remove lens housing by turning counterclockwise.
2. Remove the lamp and contact module.
3. Remove used batteries and replace with fresh batteries as shown on the outside of the engraved body.
4. Replace the contact module and lamp.
5. Replace lens housing squarely on threads and turn clockwise while pressing on the lens housing slightly.

ON/OFF

Swing the switch lever to the right (light facing away from you) until light activates. To turn light off, swing the switch lever to the left (light facing away from you) until light goes off.

Explosion Hazard - Batteries must only be changed in non-hazardous locations

Explosion Hazard - Substitution of components may impair suitability for use in hazardous locations

If light is not to be used for some time, remove batteries to prevent possible leakage and corrosion.

LAMP REPLACEMENT

1. Remove lens housing by turning counter-clockwise.
2. Remove the lamp and contact module.
3. Replace the contact module and lamp.
4. Replace lens housing squarely on threads and turn clockwise while pressing on the lens housing slightly.

PRODUCT SPECIFICATIONS

Lamp Type: Xenon
Battery Type: 4 AA Cell Alkaline (Included)
Battery Brand: Eveready^® Energizer^®

REPLACEMENT PARTS

Read This Notice Before Use.

Hydrogen Gas Absorber Pellets

Located inside the flashlight are catalyst pellets which are present to absorb hydrogen gas that could possibly be emitted by defective, leaking, reversed polarity or heavily discharged batteries. If the pellets become wet, let them air dry. Pelican Products assumes no liability for any brand batteries which are defective or cause injury to anyone when used in any Pelican flashlight.

STATIC HAZARD - clean only with a damp cloth

Battery Replacement

Do not mix battery brands or use Nicad or zinc Carbon Batteries. Do not mix old and new batteries. Replace all batteries at the same time.

Lamp Replacement

Lamp replacement may only be performed in a non-hazardous area.

DO NOT MODIFY THIS PRODUCT!

WARRANTY RETURN POLICY

Send all items for repair or replacement directly to Pelican Products Customer Service Department (postage paid). Please call for a return authorization number. Per our guarantee, Pelican Products will replace or repair any broken or defective products. Upon receipt of goods, Pelican Products will notify you of any handling and return postage charges. If your local retailer does not stock the above accessory parts, you may order them directly from Pelican Products. Send check or money order in U.S. dollars, or order by phone using MasterCard or VISA (ask for Customer Service). SORRY, NO C.O.D.'s. Subject to sales tax. Allow 2-3 weeks delivery time. Pelican Products pays postage and handling charges. POSTAGE PAID FOR U.S. zIP CODES ONLY.

23215 Early Ave. • Torrance, CA 90505 USA
Tel (310) 326-4700 • FAX (310) 326-3311 www.pelican.com

PELICAN^TM CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4 Tel (780) 481-6076 • FAX (780) 481-9586

PELI^TM PRODUCTS, S.L.U.
c/ Casp, 33-B Pral. • 08010 • Barcelona, Spain
Tel (+34) 93.467.4999 • FAX (+34) 93.487.7393 www.peli.com

© PELICAN PRODUCTS 2010
2403-311-001
5-0697 Rev A AU/10

All trademarks and logos displayed herein are registered and unregistered trademarks of Pelican Products, Inc. and others.
Eveready and Energizer are registered trademarks of Eveready Battery Company, Inc.

Documents / Resources

References

• Warranty Support | Pelican
• Cases, Flashlights, Coolers, and Travel gear | Pelican
• Cases, Torches, Military, and Professional gear | Peli

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Pelican StealthLite 2400, 2400 - Flashlight Quick Manual