Front Ventilated Seats - If Equipped - Dodge Charger 392 SRT Hellcat 2017 Owner's Manual

106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Rear Heated Seats
On some models, the two outboard seats are equipped
with heated seats. The heated seat switches for these seats
are located on the rear of the center console. There are two
heated seat switches that allow the rear passengers to
operate the seats independently.
You can choose from HI, LO or off heat settings. The
indicator lights in each switch indicate the level of heat in
use. Two indicator lights will illuminate for HI, one for LO
and none for off.
• Push the heated seat button
heating.
• Push the heated seat button
LO-level heating.
• Push the heated seat button
heating elements off.
NOTE:
• Once a heat setting is selected, heat will be felt within
two to five minutes.
• The engine must be running for the heated seats to
operate.
once to select HI-level
a second time to select
a third time to turn the
If the HI-level setting is selected, the system will automati-
cally switch to LO-level after approximately 60 minutes of
continuous operation. At that time, the number of illumi-
nated LEDs changes from two to one, indicating the
change. The LO-level setting will turn off automatically
after approximately 45 minutes.
Front Ventilated Seats — If Equipped
Located in the seat cushion and seat back are fans that
draw the air from the passenger compartment and move
air through fine perforations in the seat cover to help keep
the driver and front passenger cooler in higher ambient
temperatures. The fans operate at two speeds: HI and LO.
The front ventilated seats control buttons are located
within the Uconnect system. You can gain access to the
control buttons through the climate screen or the controls
screen.
• Press the ventilated seat button
• Press the ventilated seat button
choose LO.
• Press the ventilated seat button
the ventilated seat off.
once to choose HI.
a second time to
a third time to turn