Dodge Charger 392 SRT Hellcat 2017 Owner's Manual page 298

296 UNDERSTANDING YOUR INSTRUMENT PANEL
Icon
Faceplate Knob Blower Control
Blower Control is used to regulate the amount of air forced through the climate system. There
are seven blower speeds available. The speeds can be selected using either the blower control
knob on the faceplate or the buttons on the touchscreen.
• Faceplate: The blower speed increases as you turn the blower control knob clockwise from
Touchscreen
Buttons
• Touchscreen: Use the small blower icon to reduce the blower setting and the large blower
Panel Mode Panel Mode
Air comes from the outlets in the instrument panel. Each of these outlets can be individually
adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be
moved up and down or side to side to regulate airflow direction. There is a shut off wheel lo-
cated below the air vanes to shut off or adjust the amount of airflow from these outlets.
Bi-Level Mode Bi-Level Mode
Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed
through the defrost and side window demister outlets.
NOTE: BI-LEVEL mode is designed under comfort conditions to provide cooler air out of the
panel outlets and warmer air from the floor outlets.
the lowest blower setting. The blower speed decreases as you turn the blower control knob
counterclockwise.
icon to increase the blower setting. Blower can also be selected by pressing the blower bar
area between the icons.
Description