Easy Entry/Exit Seat - Dodge Charger 392 SRT Hellcat 2017 Owner's Manual

Hide thumbs Also See for Charger 392 SRT Hellcat 2017:
Table of Contents

Advertisement

114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To recall the memory setting for driver 2, push memory
button (2) on the driver's door or the unlock button on the
key fob linked to memory position 2.
NOTE: If the vehicle is equipped with Passive Entry, the
memory settings will be recalled with a Passive Entry
Unlock into the driver's door using the key fob linked to
position 2.
A recall can be cancelled by pushing any of the memory
buttons (S, 1, or 2) on the driver's door during a recall.
When a recall is cancelled, the driver's seat or power tilt
and telescopic steering column (if equipped) stop moving.
A delay of one second will occur before another recall can
be selected.

Easy Entry/Exit Seat

This feature provides automatic driver's seat positioning to
enhance driver mobility when entering and exiting the
vehicle.
The distance the driver's seat moves depends on where
you have the driver's seat positioned when you cycle the
vehicle's ignition to the OFF position.
• When you cycle the vehicle's ignition to the OFF posi-
tion, the driver's seat will move about 2.4 inches (60
mm) rearward if the driver's seat position is greater than
or equal to 2.7 inches (67.7 mm) forward of the rear stop.
The seat will return to its previously set position when
you cycle the vehicle's ignition to the ACC or RUN
position.
• The Easy Entry/Easy Exit feature is disabled when the
driver seat position is less than 0.9 of an inch (22.7 mm)
forward of the rear stop. At this position, there is no
benefit to the driver by moving the seat for Easy Exit or
Easy Entry.
Each stored memory setting will have an associated Easy
Entry and Easy Exit position.
NOTE: The Easy Entry/Exit feature is not enabled when
the vehicle is delivered from the factory. The Easy Entry/
Exit feature is enabled (or later disabled) through the
programmable features in the Uconnect system. Refer to
"Uconnect Settings/Customer Programmable Features" in
"Understanding Your Instrument Panel" for further infor-
mation.

Advertisement

Table of Contents
loading

Table of Contents