Table of Contents
Advertisement
12
en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts
2
Installing the Pendant Arm Wall, Corner, and Mast
(Pole) Mounts
2.1
Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative. Refer to
Section 1.4 Customer Support and Service, page 11, for contact information.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
2.1.1
Parts List
The following table lists the optional parts you may need for attaching a Pendant to the Arm
Wall, Corner, or Mast mount packages.
Mounting Options
Pendant Arm (Only)
Pendant Arm with Mounting Plate
(24 V VG5 models only, no power supply box)
Power Supply Box with 120 VAC transformer
or 230 VAC transformer
Pendant Arm with one of the following Power Supply Boxes:
–
–
Trim Skirt for Power Supply Box (optional)
Fiber Optic Ethernet Media Converter kit
Corner Mount Kit
–
Mast (Pole) Mount Kit
–
F.01U.215.779 | 1.0 | 2011.07
Power Box without transformer (24 VAC)
Power Box with 120 VAC transformer
or with 230 VAC transformer
Corner Mount Plate
Mast Mount Plate
Installation Manual
AutoDome 700 Series IP PTZ Camera
Part Numbers
VG4-S-ARM
VG4-A-ARMPLATE
VG4-A-PSU1
VG4-A-PSU2
VG4-A-PA0
VG4-A-PA1
VG4-A-PA2
VG4-A-TSKIRT
VG4-SFPSCKT
VG4-A-9542
VG4-A-9541
Bosch Security Systems, Inc.
Advertisement
Table of Contents
