Electrical Connections; Composite Cable Color-Coding - Bosch MIC 550 Series Installation And User Manual

Hide thumbs Also See for MIC 550 Series:

Table of Contents

en | Installation

5.6

Electrical Connections

All connections (power, telemetry, video) to the camera are provided through the screw

terminal connections in the MIC power supply. Purpose-built composite cables, available in

various lengths, are 2-conductor cables that are pre-made with a female terminated 12-way

connector fitted to them for attachment to the male connector installed into the base of the

camera. The table below identifies the available lengths of these cables, which are required

but sold separately from the camera. (The gauge ranges from 14 - 18.)

Model Number Length

MIC-2MS

MIC-10MS

MIC-20MS

MIC-25MS

Figure 5.8 Composite cable before connection

Figure 5.9 View of the Composite Cable connected to a MIC Series 550 camera

Refer to the MIC Series Power Supply Installation Manual included on the Installation CD for full

details on installing a MIC Series Power Supply Unit and connecting to a MIC-550 Camera.

WARNING!

Ensure that all power is disconnected before opening or working on the MIC power supply.

Installation should be made by qualified service personnel and conform to the National

Electrical Code and applicable local codes. Ensure a strong safety chain is used to secure the

MIC-550 Camera to prevent any danger of dropping the product during installation.

5.6.1

The composite cable has no termination (free wires) at the other end for wiring into the

power supply. The standard color coding used in these cables is as follows:

F.01U.239.454 | 1.0 | 2011.04

2 m

10 m

20 m

25 m

Installation Manual

MIC Series 550 Camera

Bosch Security Systems, Inc.

Table of Contents