Anetic Aid QA4 21359 Instructions For Use Manual

Split leg positioner

Table of Contents

Download this manual

Document No. 992053. Issue 1 – 22.05.23

Table of Contents

Need help?

Do you have a question about the QA4 21359 and is the answer not in the manual?

Page 1 Document No. 992053. Issue 1 – 22.05.23...
Page 3 Introduction These instructions are intended to assist you with the use and maintenance of the split leg positioner accessory. It is important that these instructions are read thoroughly before using the equipment. The device will be adversely affected, and its life expectancy reduced, if the following instructions are not observed.
Page 4 Side Bar Clamp Accessory: The split leg positioner should be used in conjunction with the following Anetic Aid side bar clamp: Item No. 10250, Clamp - Universal (Socket & Rail) - Handwheel - for UK &...
Page 5 Setting Up and Using the Split Leg Positioner As illustrated in fig. 3, the split legs must be abducted prior to attaching to the stretcher; this ensures they sit outside of the patients’ legs on the leg section. Each split leg is adjusted using the twist-to-release adjustment handle (fig.
Page 6 12 months from the date of purchase from Anetic Aid Ltd or their approved Distributor. Anetic Aid Ltd will repair or replace, at their discretion, any components found to be defective or at variance with the manufacturer’s specification within this...
Page 7 Label indicating maximum patient weight and the safe working load for the device. Anetic Aid CE product label. Anetic Aid operating table screen print. Do Not Sit; indicates that neither of the split leg positioner sections should be sat upon.
Page 8 Document No. 992053. Issue 1 – 22.05.23...