Anetic Aid QA3 Quick Start Manual

Drive assist

Hide thumbs Also See for QA3:

Quick Start Guide for

Innovative medical technology – practically applied

This 'Quick Start Guide' is designed

to help you use the

function in nine simple steps.

However, it is advisable to read the

full 'Instructions for Use' thoroughly

before operating the trolley.

assist

Engage the

of the 'Instructions for Use'.

Press the ON/OFF button; a short beep will

sound. Do not touch the

immediately after pressing the ON/OFF button.

The ON/OFF light will flash green for 1-3

seconds as

light will turn solid green when calibration

is successful, and a short beep will sound.

is now active.

Disengage the brakes; see section 9

of the 'Instructions for Use'.

wheel; see section 10

handles

calibrates. The ON/OFF

continued overleaf...

Table of Contents

Need help?

Do you have a question about the QA3 and is the answer not in the manual?

Page 1 Quick Start Guide for Innovative medical technology – practically applied This ‘Quick Start Guide’ is designed to help you use the assist function in nine simple steps. However, it is advisable to read the full ‘Instructions for Use’ thoroughly before operating the trolley. Engage the wheel;...
Page 2 Driving: Push positively on the handles and the trolley will begin to move forwards. Push harder and the trolley will move more quickly. Pull back on the handles to slow, stop, or reverse, the trolley. Driving up a slope: Push the handles fully forward, and walk at the pace of the trolley.