Page 2
NOTE: If the accessory stand is damaged or faulty it must be taken out of use with immediate effect and the fault reported to Anetic Aid, your authorised dealer or maintenance department. The accessory stand must not be used until the damage or fault has been repaired.
Page 3
The Storage Trough is suspended from the sidebar, see fig. 2. It is important that the accessory stand is cleaned and disinfected before it is put into use; refer to Section 5. Cleaning and Disinfecting. Document No. 992040. Issue 8 – 09.11.22 Page 2...
Page 5
QA4 Leg Section Storage Sockets NOTE: The accessory stand is capable of storing a maximum of 3 QA4 leg sections in the sockets provided. The QA4 shoulder arthroscopy and retrograde products can also be stored in the sockets provided, contact Anetic Aid for further details.
Page 6
Every six months we recommend the stand is inspected by a competent person, i.e. an Anetic Aid service engineer, to ensure that it is safe to use; contact Anetic Aid for further details.
Page 7
Anetic Aid Ltd or their approved Distributor. Anetic Aid Ltd will repair or replace, at their discretion, any components found to be defective or at variance with the manufacturer’s specification within this...
Page 8
Product Accessories Code Description 21370 Accessory Stand - Mobile 21371-A1 Spare Trough – Side Bar Mounting 21373 Accessory Side Bar – Socket Mounting 21322 Headrest - Full Width Articulating 21322-EU Headrest - Full Width Articulating - with EU Side Bar 21325 Headrest - Dual-articulating Head Positioner 21354...
Need help?
Do you have a question about the QA4 and is the answer not in the manual?
Questions and answers