Troubleshooting And Information Codes - Samsung NX58 560 Series User Manual

Free-standing gas range
Hide thumbs Also See for NX58 560 Series:
Table of Contents

Advertisement

Available languages

Available languages

PROBLEM
POSSIBLE CAUSE
Steam or
This is normal.
smoke coming
from under the
control panel.
Burning or oily
This is normal for a new oven
odor emitting
and will disappear within 1/2
from the vent.
hour of the first bake cycle.
Strong odor.
This is temporary.
Oven racks
are difficult to
slide.
Fan noise.
This is normal.
Convection fan
is not working.
NX58N5605SS_AP_DG68-00526B-01_EN+MES.indb 69
SOLUTION
The oven vent is located
Storage drawer
there. More steam is visible
does not slide
when using the convection
smoothly or
functions or when baking or
drags.
roasting multiple items at the
same time.
To speed the process, set
a self-cleaning cycle for a
minimum of 3 hours. (See

Troubleshooting and information codes

pages 62 and 63.)
The insulation around the
CODE SYMBOL
inside of the oven emits an
odor the first few times the
oven is used.
Apply a small amount of
vegetable oil to a paper towel
and wipe edges of the oven
racks with the paper towel.
Racks become dull and hard
to slide when they are left in
the oven during a self-clean
cycle.
The convection fan runs until
the function is over or the
door is opened.
For any codes not listed above, or if the suggested solution does not fix the
The fan starts automatically
problem, call 1-800-SAMSUNG (726-7864).
when the oven meets the
preheat temperature.
PROBLEM
POSSIBLE CAUSE
The drawer is not properly
aligned with the full-
extension roller guide rails or
nylon drawer guides.
The contents in the drawer
are too heavy.
MEANING
Shorted Key.
Check the Touch PBA signals.
Oven sensor opened problem.
Oven sensor shorted problem.
Oven overheating.
Door locking error.
SOLUTION
Remove and replace the
drawer. (See page 60)
Reduce the weight and/or
redistribute the contents in
the drawer.
SOLUTION
Press the OFF/CLEAR pad and
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the
power.
If this does not solve the
problem, call for service. See
the instructions below this
chart.
English 69
2020-06-22 오후 4:37:51

Advertisement

Chapters

Table of Contents
loading

Table of Contents