Broiling - Samsung NX58 560 Series User Manual

To change a programmed starting time, press the Delay Start pad, enter the new
starting time, and then press the START/SET pad. The oven will start cooking at
the new start time.
To change a programmed baking temperature, press the Bake pad, enter the new
baking temperature, and then press the START/SET pad. If the oven temperature is
above the new setting, the oven will beep 6 times, then show the new setting. The
oven will complete cooking at the new temperature.
To change a programmed cooking time, press the Cooking Time pad, enter the
new cooking time, and then press the START/SET pad. The oven will continue
cooking for the remaining new set time.
NOTE
Place food in the oven after preheating if the recipe calls for it. Preheating is
important for good baking results. After the oven has reached the desired cooking
temperature, it will beep 6 times.
NX58N5605SS_AP_DG68-00526B-01_EN+MES.indb 41

Broiling

The Broil function allows you to cook and brown foods using only a top heat
source. The oven door must remain closed during broiling. The meat or fish should
always be placed on a broiling grid in a broiling pan.
CAUTION
If a fire occurs during broiling, leave the oven door closed and turn off the
oven. If the fire continues, throw baking soda on the fire or use a foam-type fire
extinguisher. Do not throw water or flour on the fire. Flour may explode and water
can cause a grease fire to spread. Both can cause personal injury and/or property
damage.
How to set the oven for broiling
1. Place the food on a broiling pan with
2. Press the Broil pad once for Hi and
insert grid. Place the food and pan
on the top oven rack, positioned as
recommended in the Broiling guide on
page 42. Close the oven door.
twice for Lo. The oven will beep every
time a pad is pressed.
The Start indicator will blink to the right
of Hi or Lo and Broil on the display.
Use Lo to cook foods such as poultry or
thick cuts of meat thoroughly without
overbrowning them.
English 41
2020-06-22 오후 4:37:43