Samsung NX58 560 Series User Manual page 34

Operating the oven
To change a programmed baking temperature, press the Bake pad, enter the new
baking temperature, and then press the START/SET pad. If the oven temperature
is higher than the new setting, the oven will beep 6 times, then show the new
setting. The oven will complete cooking at the new temperature.
34 English
NX58N5605SS_AP_DG68-00526B-01_EN+MES.indb 34
4. Press the START/SET pad.
The oven will automatically light and
start preheating. The display will show
a blinking "•", along with 150°, Bake,
until the oven reaches 150°. Then, the
display will just show the actual oven
temperature.
When the oven reaches the desired
baking temperature, it will beep 6 times.
5. Place the food in the oven, and then
close the oven door. Preheating is very
important for good baking results.
6. When baking is complete, remove the
item(s) from the oven, close the oven
door, and then press the OFF/CLEAR
pad.
The oven will shut off, and the display
will show the time of day.
If your baking results are not what you are used to, the preset oven
cooking temperature can be adjusted ±30 °F (±15 °C) as follows:
1. Press and hold the Bake and 0 pads for
2. Press the Bake pad to toggle between
3. Press the number pads to enter the
4. Press the START/SET pad.
This adjustment will not affect the broiling
or the self-cleaning temperatures. The
adjustment will be retained in memory after
a power failure.
3 seconds.
The display will show AdJ and 0.
+ or – temperature adjustments.
desired temperature adjustment (for
example, 1, 0).
The display will show AdJ and 10.
The oven will beep twice, and the
display will show the time of day. The
next time you bake, the oven will use
the new temperature setting.
NOTE
2020-06-22 오후 4:37:41