Log Placement - Napoleon Oakville GDIX4N Installation Manual

3.3

log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is
different in every installation. Take the time to carefully position the glowng embers for a maximum glowing effect.
Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pig-
ments burn in during the heat-activated curing process.
Log Number
1
2
3
4
5
6
7
8
9
10
Burner Ports
Stud
(Log #1)
(Log #3)
note:
Log numbers are located on the bottom or back of the logs.
Part Number
W135-0787
W135-0969
W135-0791
W135-0789
W135-0790
W135-0792
W135-0794
W135-0793
W135-0796
W135-0795
Pilot Shield
A1
B1
C1 C2
Studs
Description
Left front log
Front middle log
Front right log
Left middle log
Middle crossover log
Front right crossover log
Back right crossover log
Left crossover log
Stud
(Log #1)
D2 D1
Studs
(Log #4)
fi nishing
Rear log
Middle log
Upper Burner
Support
Stud
A2
(Log #5)
B2
E1
Burner Ports
W415-2828 / A / 07.13.20
EN
15