Napoleon Oakville GDIX4N Installation Manual page 16

fi nishing
EN
A1
1. Place the two holes in log #1 on A1 and A2.
PLACE TEXT BOX HERE.
Do not cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
3
C1
3. Place the holes in log #3 on C1 and C2. Do
PLACE TEXT BOX HERE.
not cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
3
Hole (not visible here)
5. Place the bumpout in log #5 against the front
PLACE TEXT BOX HERE.
of the upper burner support, and the hole in
NOTE: ENSURE NOMENCLATURE IS
log #5 on E1. Log #5 must be tight against
CONSISTENT THROUGHOUT.
log #2 and log #4.
16
W415-2828 / A / 07.13.20
1
A2
3
Top View
1
2
C2
Bumpout
1
5
4
1
2. Place the two holes in log #2 on B1 and B2,
PLACE TEXT BOX HERE.
ensuring the notch fi ts around the pilot shield.
NOTE: ENSURE NOMENCLATURE IS
Secure the log with 2 screws.
CONSISTENT THROUGHOUT.
3
4. Place the holes in log #4 on D1 and D2. Do not
PLACE TEXT BOX HERE.
cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Notch
6
3
E1
6. Place the notch in log #6 on the locating piece
PLACE TEXT BOX HERE.
of log #3. Log #6 must be tight against log #2.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Pilot Shield
Notch
2
B1 B2
1
4
D2 D1
1
5