Smart Target Lock (Slope Lock/Monitoring) - Rugby 820/840 - Leica Rod Eye 180 User Manual

5.2
Smart Target Lock
using the Rugby,
step-by-step
Rod Eye 180, Applications

Smart Target Lock (Slope Lock/Monitoring) - Rugby 820/840

3
5 s
2
004644_001
Step Description
1. Set up the Rugby at the base of a slope with the X-axis pointing in the direc-
tion of the slope.
2. At the base of the slope, adjust the height of the Rod Eye 180 Digital
Receiver RF on the rod until the on-grade (centre-line) position is indicated
on the receiver by:
• the centre bar
• the green flashing LED
• a solid audio tone
• the digital display
3. Move to the top of the slope and press the laser man button for 5 seconds
to start the smart target and lock process. The receiver will show SMT, then
XSL during the X-axis slope lock process.
4. The Rugby searches for the receiver until the on-grade position is found.
Once the on-grade position is found, the receiver will flash all three LEDs
simultaneously one time and the receiver returns to normal operation. The
display will show LOC while the receiver is in lock mode.

To turn off lock mode on the receiver, hold the power button for
1.5 seconds.
X
α
1
SMT
4
XSL
α
16