Maintenance - Sharp DW-208EX Operation Manual

Maintenance

Maintenance
Front filter
Make sure to clean the front filter once every two weeks. If the filter is clogged with fine dust, the
air flow rate will drop and dehumidification efficiency will be reduced.
Remove the front filter by lifting the handle.
1
Lift it up by grasping the
carrying handle at the
back of the unit.
2 Remove the filter holder and the air purifying filter.
Make sure not to wash the air purifying filter with water.
Otherwise this might render the filter useless.
Wash the front filter.
3
A dirty front filter can be cleaned with water,
neutral detergent diluted in warm water or
with a vacuum cleaner. When cleaned with
water, dry it well in the shade.
4
Attach the air purifier filter to
the front filter and put it back
in the unit.
Main body
Wipe off any dirt from the unit using a piece of soft cloth soaked in warm water (40
detergent.
If detergent is used, make sure to wipe off the detergent with a damp cloth.
The air intake and outlet become dirty easily, so make sure to clean them well.
To clean the water tank, use a soft sponge.
Cautions
If water is allowed to splash on the unit, electrical insulation may be affected and corrosion of the unit may
eventually result.
Use a neutral detergent (e.g. for dish washing) for cleaning.
Do not use the following types of cleaning agents as they will damage plastic parts.
Thinners, benzine, alcohol, petrol, powder soap, powder polish, alkaline washing agents, hot water, acid
or scrubbing brushes.
Do not scrub or expose the unit to chemically treated cloths for any prolonged period of time as this may
damage the surface of the unit.
18
Handle
( 7)
For safety purposes, turn off and unplug the unit
before carrying out any maintenance.
For clean, sanitary and pro-long use, regular
maintenance is recommended.
Pull it out upward by
grasping the knob of
the filter frame at the
back of the unit.
Front filter
Air purifying filter
Filter holder
(When washing with water)
The dirty surface should face
downward.
2
1
Front
filter
(When cleaning with a
vacuum cleaner)
The dirty surface should face
upward.
°
C max.) or with