Negative Mode; Digital Zooming - RCA CC4352 User Manual

Recording
Digital Effects

Negative Mode

The camcorder has a negative mode that lets you turn the image negative.
1. Place the camcorder in record-pause.
Make sure the displays appears in the
viewfinder or on the LCD monitor. If
they do not, press DISPLAY.
2. Repeatedly press DIGITAL EFFECTS
until NEGPOS appears.
Negative Mode

Digital Zooming

The camcorder has digital zooming that allows you to zoom in on a subject with
magnification up to 160 times. Normal zooming is up to 72 times.
NOTE: This function can magnify an image up to 240 times when instant zoom is used at the same time
1. Place the camcorder in record-pause.
Make sure the displays appear in the
viewfinder or on the LCD monitor. If
they do not, press DISPLAY.
2. Repeatedly press DIGITAL EFFECTS
until ZM:2 appears. Use the zoom
buttons to zoom in and out. ZOOM
appears when you zoom above 16X.
Digital Zooming Mode
32
(continued)
3. Press REC/PAUSE to start recording.
4. To turn off negative recording, press
REC/PAUSE to pause recording, and
repeatedly press DIGITAL EFFECTS
until no digital effects display appears.
Normal Mode
3. Press REC/PAUSE to start recording.
4. To turn off digital zooming, press
REC/PAUSE to pause recording, and
repeatedly press DIGITAL EFFECTS
until no digital effects display appears.
NOTE: As the zoom level increases during digital
zooming, the picture will gradually become less sharp.
Use the high zoom levels mainly for special effects.
Normal Mode