Creating A Title; Correcting An Error; Chart Of Characters - RCA CC4352 User Manual

Recording
Editing Features
Titler
(continued)

Creating a Title

1. Attach a power source to the
camcorder. Press and hold the small
red button on the CAMERA/OFF/VCR
switch while you slide it to CAMERA.
2. Press TITLER to display the titler
graphics in the viewfinder or on the
LCD monitor. A flashing cursor
appears.
3. Press EDIT-ADV to move the flashing
cursor to the place where you want to
begin your title.
4. Select the first character for your title
by pressing the + or – button until the
character you want appears in the
viewfinder or on the LCD monitor.

Correcting an Error

1. Press TITLER to display the titler
graphics in the viewfinder or on the
LCD monitor.
2. Press EDIT-ADV to move the flashing
cursor over the character you want to
correct.
(continued)

Chart of Characters

Chart of Characters in Titler's Register
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 ? ' . / ,
– ; : < > ! (BLANK)
See the chart below for the characters
available.
5. After you have selected the first
character, press EDIT-ADV to move
the flashing cursor to the place where
you want the next character to appear.
6. Repeat steps 4 and 5 until you have
completed the title.
7. When you are finished, press TITLER
to store the title and remove the title
graphics from the viewfinder or LCD
monitor.
Remember: Be sure to remove the titler
graphics from the viewfinder or LCD
monitor for normal recording.
3. Press the + or – button until the
correct character appears.
Note: If you want to delete a character,
press + or – until the blank space appears.
39